MP_15

catalog.product_technologies

catalog.product_industries

Automotive Commercial vehicles Industry drive engineering

Series 15

Separators

For removing ball bearings, roller bearings, inner races and other tight parts if there is not enough space to use pulling hooks.

Download datasheet

  • The sharp blades enable flush parts to be removed where pulling jaws cannot be used.
  • The wedge-shaped separator jaws are secured underneath the component to be removed.
  • The large supporting surfaces protect the parts to be pulled.
  • For use with series 18.
  • Ultimate stability when removing, as the separator and pulling device are screwed firmly together.
  • Almost all components available as replacement parts, time-saving order process thanks to numbering system.
  • The flat surfaces of the separator blades are used to remove sensitive parts without damaging them. The separator blades provide a larger supporting surface to prevent the parts from twisting.
  • The wedge-shaped separator jaws are secured underneath the component to be removed.
  • The separator jaws are clamped by tightening the nuts on the side bolts in equal measure.
  • For removal, the tension bolts on the pulling device series 18 have to be screwed into the separator.
  • The part is removed by tightening the spindle against the end of the shaft.
  • If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
  • The separator blades' support surfaces must always sit fully beneath the part to be removed.
  • Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
  • Protective blanket required.
  • Protective goggles required.
  • Quality made in Germany.
  • Strong design, high performance and long service life.
  • Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
  • Safety label to ensure protection of intellectual property.
  • Separators
spread

mm

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

Automotive

Commercial vehicles

Industry

drive engineering

Customs tariff number

Country of origin

Is packed

Length 1

Length 2

Length 3

Width

Height

Discount group

Space below

mm

Space next to it

mm

spread

mm

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

Scania

Format (old)

BALDUR no.

HAZET new no.

BETA

Bahco-(Sandvik)

Bahco (old)

Betex

Buco no.

NEXUS no.

Usag

Facom no.

SAM

STAHLW.nr

KLANN

Acesa

HAZET old no.

Sykes=Octopul

CARAT

Space below

mm

Space next to it

mm

spread

mm

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

MATRA (VW)

Enerpac no.

Space below

mm

Space next to it

mm

spread

mm

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

Space below

mm

Space next to it

mm

spread

mm

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

Space below

mm

Space next to it

mm

spread

mm

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

Space below

mm

Space next to it

mm

spread

mm

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

Space below

mm

Space next to it

mm

15-00 6 - 40 0.2 1 6 - 40 40 82055980 DE 1 100 0 0 20 133 Ku-STA 0 40 6 - 40 0.2 1 6 - 40 40 0 40 6 - 40 0.2 1 6 - 40 40 0 40 6 - 40 0.2 1 6 - 40 40 0 40 6 - 40 0.2 1 6 - 40 40 0 40 6 - 40 0.2 1 6 - 40 40 0 40 6 - 40 0.2 1 6 - 40 40 0 40
15-0 8 - 60 0.7 1 8 - 60 60 82055980 DE 1 100 0 0 20 133 Ku-STA 0 60 8 - 60 0.7 1 8 - 60 60 587 516 69340000 1.40/0 775-60 1534/1 4551-A 3801 48-060 60/0 170-0 472A/1 U.53T1 EX-110-A 12613-0 KL-0172-0 6372.05050 775-60 09510000 64769508 0 60 8 - 60 0.7 1 8 - 60 60 0 60 8 - 60 0.7 1 8 - 60 60 0 60 8 - 60 0.7 1 8 - 60 60 0 60 8 - 60 0.7 1 8 - 60 60 0 60 8 - 60 0.7 1 8 - 60 60 0 60
15-1 12 - 75 1.1 1 12 - 75 75 82055980 DE 1 122 0 0 29 157 Ku-STA 0 75 12 - 75 1.1 1 12 - 75 75 587 517 69340001 1.40/1 775-75 1534/2 4551-B 3802 48-075 60/1 170-1 472A/2 12613-1 KL-0172-1 6372.07070 775-75 09520000 64769516 0 75 12 - 75 1.1 1 12 - 75 75 V/146.8 MPA-1 0 75 12 - 75 1.1 1 12 - 75 75 0 75 12 - 75 1.1 1 12 - 75 75 0 75 12 - 75 1.1 1 12 - 75 75 0 75 12 - 75 1.1 1 12 - 75 75 0 75
15-2 22 - 115 2.9 1 22 - 115 115 82055980 DE 1 174 0 0 35 237 Ku-STA 0 115 22 - 115 2.9 1 22 - 115 115 587 318 69340002 1.40/2 775-115 1534/3 4551-C 3803 48-115 60/2 170-2 472A/3 U.53T2 EX-111-A 12613-2 KL-0172-2 6372.10100 775-115 09530000 0 115 22 - 115 2.9 1 22 - 115 115 0 115 22 - 115 2.9 1 22 - 115 115 0 115 22 - 115 2.9 1 22 - 115 115 0 115 22 - 115 2.9 1 22 - 115 115 0 115 22 - 115 2.9 1 22 - 115 115 0 115
15-3 25 - 155 5.3 1 25 - 155 155 82055980 DE 1 215 0 0 37 290 Ku-STA 0 155 25 - 155 5.3 1 25 - 155 155 587 432 69340003 1.40/3 1534/4 4551-D 3804 48-150 60/3 170-3 472A/4 U.53T3 EX-112-A 12613-3 KL-0172-3 6372.10130 0 155 25 - 155 5.3 1 25 - 155 155 0 155 25 - 155 5.3 1 25 - 155 155 0 155 25 - 155 5.3 1 25 - 155 155 0 155 25 - 155 5.3 1 25 - 155 155 0 155 25 - 155 5.3 1 25 - 155 155 0 155
15-4 30 - 200 11.8 1 30 - 200 200 82055980 DE 1 415 0 0 285 45 Ku-STA 0 200 30 - 200 11.8 1 30 - 200 200 1.40/4 48-210 60/4 170-4 472A/5 U.53T4 EX-113-A 6372.15200 0 200 30 - 200 11.8 1 30 - 200 200 0 200 30 - 200 11.8 1 30 - 200 200 0 200 30 - 200 11.8 1 30 - 200 200 0 200 30 - 200 11.8 1 30 - 200 200 0 200 30 - 200 11.8 1 30 - 200 200 0 200
15-5 30 - 250 20.1 1 30 - 250 250 82055980 DE 1 475 0 0 340 58 Ku-STA 0 250 30 - 250 20.1 1 30 - 250 250 6372.15240 0 250 30 - 250 20.1 1 30 - 250 250 0 250 30 - 250 20.1 1 30 - 250 250 0 250 30 - 250 20.1 1 30 - 250 250 0 250 30 - 250 20.1 1 30 - 250 250 0 250 30 - 250 20.1 1 30 - 250 250 0 250