MP_15_Satz

catalog.product_technologies

catalog.product_industries

Automotive Commercial vehicles Industry drive engineering

Series 15

Separating-sets

For removing ball bearings, roller bearings, inner races and other tight parts if there is not enough space to use pulling hooks.

Download datasheet

  • 4-parts, the sets contain one separator, one pulling device and a pair of extensions.
  • The sharp blades enable flush parts to be removed where pulling jaws cannot be used.
  • The wedge-shaped separator jaws are secured underneath the component to be removed.
  • The large supporting surfaces protect the parts to be pulled.
  • Instructions on the cover.
  • Secure storage in special foam.
  • Personal KUKKO-Chip-Code.
  • Ultimate stability when removing, as the separator and pulling device are screwed firmly together.
  • Practical package for universal use.
  • Complete easy-to-manage package.
  • Almost all components available as replacement parts, time-saving order process thanks to numbering system.
  • Kit in the tried-and-tested KUKKO-i-Boxx-System.
  • The wedge-shaped separator jaws are secured underneath the component to be removed.
  • The separator jaws are clamped by tightening the nuts on the side bolts in equal measure.
  • The flat surfaces of the separator blades are used to remove sensitive parts without damaging them. The separator blades provide a larger supporting surface to prevent the parts from twisting.
  • For removal, the tension bolts on the pulling device have to be screwed into the separator.
  • Note: The clamping depths can be increased using the extensions included in the set.
  • The part is removed by tightening the spindle against the end of the shaft.
  • If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
  • The separator blades' support surfaces must always sit fully beneath the part to be removed.
  • Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
  • Protective blanket required.
  • Protective goggles required.
  • Quality made in Germany.
  • Strong design, high performance and long service life.
  • Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
  • Safety label to ensure protection of intellectual property.
  • A tube of KUKKO special grease included for pressure spindle.
  • Separators
  • Set
weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

content

distance of side screw

mm

depth of side screw

mm

type of case

BALDUR no.

BETA

Betex

NEXUS no.

Facom no.

SAM

SKF

KLANN

Octopull=sykes

Automotive

Commercial vehicles

Industry

drive engineering

Customs tariff number

Country of origin

Is packed

Length 1

Length 2

Length 3

Width

Height

Discount group

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

distance of side screw

mm

depth of side screw

mm

HAZET new no.

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

distance of side screw

mm

depth of side screw

mm

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

distance of side screw

mm

depth of side screw

mm

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

distance of side screw

mm

depth of side screw

mm

weight

kg

package unit

St. / pcs.

Diameter of the shaft

mm

distance of side screw

mm

distance of side screw

mm

depth of side screw

mm

15-K 2.9 1 8 - 60 60 4 50 - 110 71 - 250 i-Boxx 1.41/0 1535/C1 48/49-060 173-0 U.53J1 EX-250-A TMBS 50 KL-0170-0 093005 82055980 DE 1 340 0 0 310 72 Ku-STA 2.9 1 8 - 60 60 50 - 110 71 - 250 2.9 1 8 - 60 60 50 - 110 71 - 250 2.9 1 8 - 60 60 50 - 110 71 - 250 2.9 1 8 - 60 60 50 - 110 71 - 250 2.9 1 8 - 60 60 50 - 110 71 - 250
15-A 4.4 1 12 - 75 75 4 60 - 150 122 - 300 i-Boxx 1.41/1 1535/C1 48/49-075 173-1 EX-251-A KL-0170-1 82055980 DE 1 340 0 0 310 72 Ku-STA 4.4 1 12 - 75 75 60 - 150 122 - 300 1775N/4 4.4 1 12 - 75 75 60 - 150 122 - 300 4.4 1 12 - 75 75 60 - 150 122 - 300 4.4 1 12 - 75 75 60 - 150 122 - 300 4.4 1 12 - 75 75 60 - 150 122 - 300
15-B 9.5 1 22 - 115 115 4 60 - 200 125 - 350 L-Boxx 1.41/2 48/49-115 173-2 U.53J2 EX-252-A TMBS 100 KL-0170-2 82055980 DE 1 445 0 0 360 153 Ku-STA 9.5 1 22 - 115 115 60 - 200 125 - 350 1775N-1/4 9.5 1 22 - 115 115 60 - 200 125 - 350 9.5 1 22 - 115 115 60 - 200 125 - 350 9.5 1 22 - 115 115 60 - 200 125 - 350 9.5 1 22 - 115 115 60 - 200 125 - 350
15-C 17 1 25 - 155 155 4 80 - 300 144 - 400 Metall / Metal 1.41/3 1535/C4 48/49-150 173-3 EX-253-A TMBS 150 KL-0170-3 82055980 DE 1 430 0 0 375 105 Ku-STA 17 1 25 - 155 155 80 - 300 144 - 400 17 1 25 - 155 155 80 - 300 144 - 400 17 1 25 - 155 155 80 - 300 144 - 400 17 1 25 - 155 155 80 - 300 144 - 400 17 1 25 - 155 155 80 - 300 144 - 400
15-D 32.2 1 30 - 200 200 4 120 - 380 134 - 550 Metall / Metal 1.41/4 1535/C5 48/49-210 173-4 EX-253-A 82055980 DE 1 500 0 0 315 105 Ku-STA 32.2 1 30 - 200 200 120 - 380 134 - 550 32.2 1 30 - 200 200 120 - 380 134 - 550 32.2 1 30 - 200 200 120 - 380 134 - 550 32.2 1 30 - 200 200 120 - 380 134 - 550 32.2 1 30 - 200 200 120 - 380 134 - 550
15-E 49 1 30 - 250 250 4 150 - 440 225 - 600 Metall / Metal 82055980 DE 1 540 0 0 345 115 Ku-STA 49 1 30 - 250 250 150 - 440 225 - 600 49 1 30 - 250 250 150 - 440 225 - 600 49 1 30 - 250 250 150 - 440 225 - 600 49 1 30 - 250 250 150 - 440 225 - 600 49 1 30 - 250 250 150 - 440 225 - 600