MP_18-B

catalog.product_technologies

Hydraulic technology

catalog.product_industries

Automotive Commercial vehicles Industry drive engineering

Series 18-B

Hydraulic pulling device(including mechanical pressure screw)

For use with series 17, series 15, series 18-AS and series 18-A.

Download datasheet

  • For use with series 15 and 17 separators.
  • Hydraulic spindle and mechanical pressure screw.
  • Milled thread treated with special coating.
  • Easy and even pulling for particularly tight parts.
  • Ultimate stability when removing, as the separator and pulling device are screwed firmly together.
  • Almost all components available as replacement parts, time-saving order process thanks to numbering system.
  • The wedge-shaped separator jaws are secured underneath the component to be removed.
  • Screw the spindle body into the cross-beam from below until the spindle body sticks out of the cross-beam by approx. 60 mm.
  • Screw the cap onto the spindle body and tighten the side screw.
  • Before use, check whether the pressure spindle is screwed far enough out of the cap so that the hydraulic piston is located in the initial position in the hydraulic cylinder.
  • For removal, the tension bolts on the pulling device have to be screwed into the separator.
  • Use the knurled screws to position the cross-beam.
  • Operating the upper spindle using the torque wrench will provide the force required for pulling.
  • After completing the removal process, reset the piston to the initial position.
  • If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
  • The separator blades' support surfaces must always sit fully beneath the part to be removed.
  • Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
  • Protective blanket required.
  • Protective goggles required.
  • Quality made in Germany.
  • Strong design, high performance and long service life.
  • Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
  • Safety label to ensure protection of intellectual property.
  • A tube of KUKKO special grease included for pressure spindle.
  • Product video on the product can be opened.
  • Pulling device
weight

kg

package unit

St. / pcs.

distance of side screw

mm

depth of side screw

mm

thread

hexagon drive (male)

mm

BALDUR no.

Automotive

Commercial vehicles

Industry

drive engineering

Customs tariff number

Country of origin

Is packed

Length 1

Length 2

Length 3

Width

Height

Discount group

maximum load

US t

weight

kg

package unit

St. / pcs.

distance of side screw

mm

depth of side screw

mm

hexagon drive (male)

mm

maximum load

US t

weight

kg

package unit

St. / pcs.

distance of side screw

mm

depth of side screw

mm

hexagon drive (male)

mm

maximum load

US t

weight

kg

package unit

St. / pcs.

distance of side screw

mm

depth of side screw

mm

hexagon drive (male)

mm

maximum load

US t

18-2-B 4.7 1 60 - 200 125 - 250 M14x1,5 22 1.38/2-HSP1 82055980 DE 0 0 0 0 0 0 Ku-STA 8 4.7 1 60 - 200 125 - 250 22 8 4.7 1 60 - 200 125 - 250 22 8 4.7 1 60 - 200 125 - 250 22 8
18-3-B 8.4 1 80 - 300 144 - 300 M18x1,5 27 1.38/3-HSP2 82055980 DE 0 0 0 0 0 0 Ku-STA 11.5 8.4 1 80 - 300 144 - 300 27 11.5 8.4 1 80 - 300 144 - 300 27 11.5 8.4 1 80 - 300 144 - 300 27 11.5
18-4-B 21.1 1 120 - 380 134 - 350 G 5/8" 36 1.38/4-HSP3 82055980 DE 0 0 0 0 0 0 Ku-STA 17 21.1 1 120 - 380 134 - 350 36 17 21.1 1 120 - 380 134 - 350 36 17 21.1 1 120 - 380 134 - 350 36 17
18-5-B 37 1 150 - 440 225 - 400 G 3/4" 41 1.38/5-HSP3 82055980 DE 0 0 0 0 0 0 KU-STA 22.5 37 1 150 - 440 225 - 400 41 22.5 37 1 150 - 440 225 - 400 41 22.5 37 1 150 - 440 225 - 400 41 22.5