catalog.product_technologies
|
catalog.product_industries
|
|
|
Series K-70
Ball bearing extractor sets "PULLPO"
To remove grooved ball bearings without causing damage and without having to dismantle the shaft.
- With this puller, grooved ball bearings that are simultaneously located on a shaft and in a casing can be quickly and easily removed.
- Puller is self-tensioning and easy to handle.
- Pulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force.
- Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the jaw.
- The proven KUKKO claw in a newly developed, modern jaw design.
- The two pulling jaw versions are color-coded for easier distinction.
- The pulling jaws are tempered for a long service life.
- The special cross-beam design ensures secure retention of the the part to be removed by the pulling jaws thanks to the spread adjuster.
- Mechanical pressure spindle.
- Rounded spindle head is used with the slide hammer as a spindle top.
- Milled thread treated with special coating.
- Instructions and conversion table in the cover.
- Secure storage in special foam.
- Puller is self-tensioning and easy to handle.
- Simple, self-explanatory use with a small number of individual components.
- Simple mounting of the pulling jaws with 90° rotation in the cross-beam.
- Secure, form-fitting connection of the pulling jaws with the cross-beam.
- Only two pulling jaw types required.
- Machined, lateral jaw surfaces ensure optimal jaw alignment with the cross-beam.
- Magnets under the cross-beam ensure simple mounting of the support rings on the ball bearing.
- Spindle head band prevents the wrench from slipping off.
- Non-contact removal possible - in combination with a slide hammer.
- First screw the spindle into the cross-beam.
- Depending on the application: head upward (use with key), head downward as a spindle tip (use with slide hammer).
- Then insert the jaws into the notches for this purpose and turn them 90°.
- Place the appropriate support ring on the ball bearing to be removed.
- Now place the jaws on the puller in the ball bearing.
- Turn the spindle until the pulling jaws are tightened.
- The ball bearing can now be removed.
- Ball bearing removal
- Removing
- Set
kg |
St. / pcs. |
mm |
|
|
|
St. / pcs. |
|
mm |
|
|
|
|
|
|
|
|
|
|
mm |
St. / pcs. |
mm |
mm |
mm |
|
|
|
|
kg |
St. / pcs. |
mm |
St. / pcs. |
mm |
mm |
mm |
St. / pcs. |
mm |
mm |
mm |
kg |
St. / pcs. |
mm |
St. / pcs. |
mm |
mm |
mm |
St. / pcs. |
mm |
mm |
mm |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| K-70-A | 1.9 | 1 | 10 - 30 | 18 | i-Boxx | 6000-6006; 6200-6205; 6300-6304 | 7 | 13 | 26 - 52 | 82055980 | DE | 0 | 280 | 0 | 0 | 45 | 45 | Ku-STA | 6 | 19 - 38 | - | - - - | 70 | 10 - 42 | 3 | https://www.youtube.com/watch?v=NsC-pZ_ieBg | https://www.youtube.com/watch?v=x7MY6lNlkjg | https://www.youtube.com/watch?v=-2qw-JZOclI | 1.9 | 1 | 10 - 30 | 7 | 26 - 52 | 19 - 38 | - | - - - | 70 | 10 - 42 | 1.9 | 1 | 10 - 30 | 7 | 26 - 52 | 19 - 38 | - | - - - | 70 | 10 - 42 | ||
| K-70-B | 4.4 | 1 | 17 - 100 | 21 | i-Boxx | 6007-6020; 6206-6212; 6305-6311; 6403-6408 | 7 | 62 - 150 | 82055980 | DE | 0 | 280 | 0 | 0 | 45 | 45 | Ku-STA | 8 | 38 - 77,5 | 4 | 35 - 80 | 156 | - - - | - | https://www.youtube.com/watch?v=NsC-pZ_ieBg | https://www.youtube.com/watch?v=x7MY6lNlkjg | https://www.youtube.com/watch?v=-2qw-JZOclI | 4.4 | 1 | 17 - 100 | 7 | 17 | 62 - 150 | 38 - 77,5 | 4 | 35 - 80 | 156 | - - - | 4.4 | 1 | 17 - 100 | 7 | 17 | 62 - 150 | 38 - 77,5 | 4 | 35 - 80 | 156 | - - - | |
| K-70-C | 7.1 | 1 | 10 - 100 | 38 | L-Boxx | 6000-6020; 6200-6212; 6300-6311; 6403-6408 | 13 | 26 - 150 | 82055980 | DE | 0 | 280 | 0 | 0 | 45 | 45 | Ku-STA | 14 | 19 - 77,5 | 4 | 35 - 80 | 70; 156 | 10 - 42 | 3 | https://www.youtube.com/watch?v=NsC-pZ_ieBg | https://www.youtube.com/watch?v=x7MY6lNlkjg | https://www.youtube.com/watch?v=-2qw-JZOclI | 7.1 | 1 | 10 - 100 | 13 | 13; 17 | 26 - 150 | 19 - 77,5 | 4 | 35 - 80 | 70; 156 | 10 - 42 | 7.1 | 1 | 10 - 100 | 13 | 13; 17 | 26 - 150 | 19 - 77,5 | 4 | 35 - 80 | 70; 156 | 10 - 42 |